SPECIFICATION
Conicity : 5 Deg 57', 4 Deg
20' & 3 Deg 30'
Surface finish types : Velvet finish & Flock finish
APPLICATION
Depending upon the application the specification of
the cone varies. The popular sizes in the present
Textile Industries are 9 Deg15', 5 Deg 57', 4 Deg
20', 3 Deg 30', etc.
In all yarn winding application, tension at the traverse
extremes pulls yarn towards the cone centre. So we
have to provide suitable surface finish to the cones
like Embossing, Velvet Finishing, Flocking, etc.
Generally,
Embossing is used for coarse and lively yarns.
This surface provides extra resistance to yarn slippage.
However fine embossing surface is provided for medium
count yarn and for the threads where take off could
be restricted by the above bold embossing surface.
This surface holds winding to full length, yet permits
free delivery to knitting or sewing machine.
Velvet Finish surface is ideal for fine cotton
yarns and prevents damage to delicate filaments of
synthetic fibres. Yarn will feed off smoothly without
slouging, hanging or breaking. Velvet surface can
be provided according to the requirement.
Flocked Surface is found quite suitable for
winding Rayon, Nylon and other low twist fine filament
yarns. This is a smooth cone with flock finish provided
on either entire areas or bonded at critical areas.
The effect of flock can be controlled according to
the twist, denier and number of yarn filaments. This
surface also provides barrier to minimize absorption
of coning oil by the paper.
A. 9 Deg 15' Cones - Regular, Plain or Plain Point
Nose.
This cone is used principally for hosiery yarns on
the universal cone winders. The specifications, colour,
tip, surface finish are all provided according to
the standard requirement.
B. 5 Deg 57' Cones - Regular, Straight or Plain
Point Nose.
This cone is mainly used for winding single and multiple
and cotton thread, synthetic yarns, twines, etc. In
the latest auto coner like Savio Italy, these cones
are widely used. These cones will have either embossed
or velvetted or flocked surface.
C. 4 Deg 20' Cones - Regular, Nosed or Plain Point.
These cones are used in two-for-one twisters, yarn
doubling machine and for some special purposes.
D. 3 Deg 30' Cones - Crimped Nose.
These cones are used to wind rayon, nylon and other
filament yarns for knitting or creeling. This can
be either velvetted or flocked surface. Heavy weight
cones are used for constructive yarns and extra large
packages.
E. 3 Deg 51' Cones - Regular, Plain or Straight
Nose.
These cones are used in tyre-cord tuffed and carpet
yarns of a heavy nature.
Colors & Patterns
